Hi,
I have these warnings when I start my miner, can somebody help me, what is wrong?
..
..
..
Is this this an issue of my GPU driver?
I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?
You are using some variation of non-13.12 driver. I've actually had a rig or 2 working on the 14.4s with clPTS before.. so it still may work for you (but slower).
Either way, 800 h/s is low for 4 7950s. Each 7950 is capable of 300h/s+. All of my 5 card 7950 rigs do 1.3k+ @ 1100/1500, but they are also on the 13.12s.
THANK YOU for the replies, let me install 13.12 and add 1100/1500.
Ok, so I have installed 13.12 Catalyst on my 4-MSI 7950 and my settings below:
setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o stratum+tcp://mine.moneropool.org:80 -u (address) -p x --gpu-engine 1000 --gpu-memclock 1500
This setting gives me a total of 1100 h/s .......and 275 h/s each, can I still push this to 300 h/s? I don't know how....
Also for 3 - R9 290s are getting a total of 1280 h/s with settings below:
setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o stratum+tcp://mine.moneropool.org:80 -u (address) -p x
Actually no memclock and gpu engine settings, please post your settings here if you can get higher than mine.
With 3 290s I'm getting just shy of 1600h/s with 1200/1500. I guess this miner is not pushing the cards so much in its current state as I can't get anywhere near this high of an overclock usually.