@david I think everyone in this forum would appreciate it if Blackarrow and company come in here and take into consideration customers' input in regards to the final compensation for batch 1 before making a final decision by themselves.
David, please acknowledge this. Awaiting your response..
Any input on the compensation can be posted here or on ecointalk or PM'ed to me. I am faster at answering on ecointalk usually because the interface for unread posts and messages is better
X3 progression ?!
They need to come up with the next stall tactic on the X3.
They did a stellar job on the X1, where magically the original controller started working the moment people started asking about the rpi version shipping.
The controller didn't magically start working, the problem with the control board was fixed by the engineers.
After being flamed at on the ecointalk forums for asking this very question, I contacted MinerSource and they stated that they will not know what cords will come with your unit until it arrives at their facility. They will then notify people on whether they need to buy cords or not.
Per ecointalk forums, David said they would do their best to ensure everyone has the correct cord, this was also stated previously in updates. But, the first actual miner, received by MinerSource, did not come with a power cord per Thomas_s, and the first miner, not to a BA employee or reseller, came with the wrong cord (per ecointalk forums). Obviously we know what BA's best is given our current situation, but I think given proper notice from MinerSource I can still order cables and have them arrive in time with my units so I cam holding out for that. (although I would be very unhappy to have to lay down another 10 or so dollars per X-1 along with shipping costs)
Just for your information, the unit shipped to me had the correct power cord.