Thanks but it didn't work.  What's the equivalent of that in BFGminer's .bat file?

I tried something similar, (displayed later in this response), but it fails with "Unexpected extra command line argument".
This is my failing batch file with BFGminer in a Windows CMD prompt with the following in a .bat file:
bfgminer.exe -S noauto -S gridseed:all --gridseed-options=baud=115200,freq=838,chips=40,modules=1 –-hotplug=5 --scrypt -o stratum+tcp://gridseed.wemineltc.com:3333 -u testworker.1 -p 123 --failover-only -o stratum+tcp://stratum.scryptguild.com:3333 -u testworker.1 -p 123.

BFGminer doesn't like the "--gridseed-options=baud=115200,freq=838,chips=40,modules=1 –-hotplug=5" portion.  It fails & terminates with with "Unexpected extra command line argument".

But this works in a .bat file:
bfgminer.exe -S noauto -S gridseed:all --scrypt -o stratum+tcp://gridseed.wemineltc.com:3333 -u testworker.1 -p 123 --failover-only -o stratum+tcp://stratum.scryptguild.com:3333 -u testworker.1 -p 123.  But this won't hash above 8MH/s.

My problem is that they don't go above 3.5MH/s with this string even though they are supposed to hit a minimum of 5.2MH/s.  Not seeing this.  Getting a top hashing of 6-7MH/s with both G-blades.

Under my Raspberry Pi Model-B I get 11-12Mh/s, minimal HW errors but the hashing on there last about 30 minutes before it all comes to a crawling 720KH/s.  Needless to say which is why I'm trying this under windows 7 SP1 now.  I tried getting them to work with Multiminer v3.2.2 but the best I got was also between 5-6MH/s.
So now I'm trying to get this to work from the Window CMD prompt.
Once I can past the basic stuff working stable, then I want to get to mod the crap out of these G-blades.


So that's why I was asking if I could get someone to display either their BFGminer.conf file, preferably under v4.2.0 or their CGminer.