I think there is a problem with pool
http://HarmonyCoinPool.comI'm pointing my miner to stratum+tcp://harmonycoinpool.com:
5550 which should be the port for X11 with difficulty 0.1 but my sgminer gets diff 1.0 instead of 0.1 . I think this difficulty is too high, the miner may not submit shares for a longer period of time which triggers my monitoring application to restart the miner/computer.
This is what I see in my sgminer:
sgminer 4.1.0 - Started: [2014-06-17 12:23:17] - [0 days 00:07:59]
---------------------------------------------------------------------------
(5s):2.937M (avg):2.850Mh/s | A:8 R:0 HW:0 WU:0.038/m
ST: 1 SS: 0 NB: 6 LW: 557 GF: 0 RF: 0
Connected to harmonycoinpool.com:5550 (stratum) diff 1.000 as user BB..........
Block: 16557c87... Diff:17.5T Started: [12:29:47] Best share: 0.969
---------------------------------------------------------------------------
[P]ool management [G]PU management [S]ettings [D]isplay options [Q]uit
GPU 0: 63.6C 1797RPM | 2.841M/2.851Mh/s | A:8 R: 0.0% HW:0 WU:0.038/m I:
---------------------------------------------------------------------------
I am pointing to the same x11 pool, but am getting a much lower difficulty - using sgminer as well.
sgminer 4.1.0 - Started: [2014-06-17 19:04:24] - [0 days 00:02:34]
--------------------------------------------------------------------------------
(5s):3.234M (avg):3.148Mh/s | A:53 R:1 HW:0 WU:0.047/m
ST: 2 SS: 0 NB: 3 LW: 187 GF: 0 RF: 0
Connected to harmonycoinpool.com:
3046 (stratum) diff 0.020 as user B
Block: 707b77db... Diff:34 Started: [19:06:49] Best share: 1.624
--------------------------------------------------------------------------------
[P]ool management [G]PU management [S ]ettings [D]isplay options [Q]uit
GPU 0: | 1.552M/1.560Mh/s | A:28 R: 1.1% HW:0 WU:0.023/m I:19
GPU 1: | 1.600M/1.615Mh/s | A:25 R: 0.0% HW:0 WU:0.024/m I:19
--------------------------------------------------------------------------------
Thing is, on
http://harmonycoinpool.com/workers , it doesnt seem like anything is being generated... it this just because the page isnt reflecting the actual blocks found and/or coin generation? From that page~
Address Shares Invalid shares Found blocks Efficiency Hashrate
BTZiuPi9SAgkEpbV1fjedH2dr3CDWLacTP 0 0 NaN 100% 2.12 MH
BPveQhd6nB5NZs5NheujuRwTb1Q4oifpjV 0 0 NaN 100% 4.01 MH
B9zdfNknyUKq7AHLvghqj96M9g1XZ4UC4g 0 0 NaN 99.49% 2.67 MH
You are pointing your miner to port 3046 which is the specific config for Hirocoin. I pointed my miner to port 5550 which should automatically mine the most profitable coin for X11 protocol.
Anyway I can't see my address on the workers page neither. Maybe because in the last hour I found only 3 shares that are above difficulty 1. Anyway i'm stopping mining there until this issue will be fixed.
page is misleading because the port 3046 will mine only Hirocoin and the algorithm is set to X13 which isn't supported by this pool at all)