Post
Topic
Board Announcements (Altcoins)
Re: [ANN][MIN] Minerals - POS. Fair Distribution Cryptocurrency
by
Hoshimaru
on 24/06/2014, 07:35:49 UTC
Pool Hashrate - 1,317.68 MH/s ...  That's UP 100MHs from earlier...   Spread the word...

http://multipool.minerals.pro

Damn... I added 4MH to the pool just by installing new drivers (14.6 RC), new sph_sgminer_14.6 and small changes to the configuration Wink
Code:
GPU 0:  60.0C 1324RPM | 3.949M/4.019Mh/s | A:14 R:  0.0% HW:0 WU:0.048/m I:20
 GPU 1:  65.0C 1359RPM | 3.976M/4.025Mh/s | A:8 R:  0.0% HW:0 WU:0.047/m I:20
 GPU 2:  59.0C 1355RPM | 3.952M/4.019Mh/s | A:21 R:  0.0% HW:0 WU:0.072/m I:20

Settings for these MSI R9 280X Gaming (undervolted: 956mV iso 1500mV):
Code:
"expiry" : "1",
"no-submit-stale" : true,
"queue" : "0",
"scan-time" : "1",
"auto-fan" : true,
"gpu-threads" : "2",
"vectors" : "1",
"gpu-dyninterval" : "7",
"gpu-engine" : "1000,1000,1000",
"gpu-fan" : "30-65",
"gpu-memclock" : "1500",
"gpu-powertune" : "20,20,20",
"intensity" : "20",
"kernel" : "x11mod",
"temp-target" : "75",
"temp-overheat" : "78",
"temp-cutoff" : "80",
"worksize" : "128",
"thread-concurrency" : "8192",
"no-pool-disable" : false,
"loopup-gap" : "2"
Is your 280x ver 1.2?I can't change the volt by all means.How did you do that?
I've two different versions of the card, which are known to be voltage locked by the BIOS.
It took me quite some time to figure it out, but you can modify certain group of bytes in the ROM and by doing so, forcing it to use a low or higher voltage. These babies can go a low as 850mV, but that would take away too much of the hashrate.

You can read all the steps & research about it here: https://litecointalk.org/index.php?topic=12680.0
I'm also Hoshimaru on that forum.