Re: [ANN][JPC]JackpotCoin#Unique JHA Algo#Ultra Fast Trans#1st True PoW/PoS Hybrid
Hi,
I just released an optimized version of sgminer for jackpotcoin for 14.6 amd drivers.
It was tested on my R9-290x at 1050MHz.
The hashrate is 5.97MHash/s
with the standard jackpotcoin miner, the speed was 3.5MHash/s on 13.12 drivers and 4.1MHash.s on 14.6.
So it is an increase between 50% and 100% depending on the drivers you currently use.
This is still lower than nvidia hashrate (however here it is running on all the hashes... so this is at that level still a work in progress
The source can be found here: https://github.com/djm34/sgminer-jpc
windows binaries here: https://mega.co.nz/#!0d9xjagT!H-K3q-XcyHIGEPcPQOKPcW7sdvh8cAaAmHqNRP09zBg
To use the algo: sgminer --kernel jpc -o pool -u password
Donation are welcomed to support development effort (and since you will be getting more coins) and they can be sent at these addresses:
JPC: JWdVcJZdmdTdFEM1acumNQjrnrx3J7mdec
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
A bounty from jackpotcoin dev would be good too
I just released an optimized version of sgminer for jackpotcoin for 14.6 amd drivers.
It was tested on my R9-290x at 1050MHz.
The hashrate is 5.97MHash/s
with the standard jackpotcoin miner, the speed was 3.5MHash/s on 13.12 drivers and 4.1MHash.s on 14.6.
So it is an increase between 50% and 100% depending on the drivers you currently use.
This is still lower than nvidia hashrate (however here it is running on all the hashes... so this is at that level still a work in progress
The source can be found here: https://github.com/djm34/sgminer-jpc
windows binaries here: https://mega.co.nz/#!0d9xjagT!H-K3q-XcyHIGEPcPQOKPcW7sdvh8cAaAmHqNRP09zBg
To use the algo: sgminer --kernel jpc -o pool -u password
Donation are welcomed to support development effort (and since you will be getting more coins) and they can be sent at these addresses:
JPC: JWdVcJZdmdTdFEM1acumNQjrnrx3J7mdec
BTC: 1NENYmxwZGHsKFmyjTc5WferTn5VTFb7Ze
A bounty from jackpotcoin dev would be good too
Nice job, from 2,3 MH/s to 2,5 MH/s at my R9 280x GPUs
Continue improvements buddy 
Nice job again
I went from 2.4Mhash to 4.3Mhash on a 280x and still using 13.12 drivers.
Just copied AMD_ocl and AMD_opencl files from 14.6 to the miners directory and everything works perfectly.
Hi, my rig works on a fake copy of windows 8 with 6x 280x gpus using 13.12 drives. im not able to upgrade to windows 8.1 so does anyone knows how to trick the windows and possibly replace files from drives 14.6 beta to the ones i have??? thanks in advance...
Im getting about 3100khs each card, sapphire 280x toxic.
under properties, you can set sgminer to emulate W7. This MAY allow you to change the drivers in Device manager to the beta 14.6.
W7, BTW, may only support 4 cards. My rig would not accept a 5th card.