I am not familiar with multiple PSU's. How to set up single rail or multi rails? what is the best option to make neptune work? suppose I have three 850W PSU.
Each PSU is single OR multi rail.
Each rail needs to be capable 300 Watt minimum for each ASIC plugged into that rail.
(based on KnC statements)
For multi rail supplies you gotta dig into the literature for specifics on each rail.
For your 3 x 850 question, I'll assume single rail PSUs.
Use 2 ASIC per PSU and power controller cube from 3rd PSU with one ASIC.
If the 'suits' are to be believed this will load the 850's to around 600 Watts.
If your three 850W PSUs are single rail and were in one box it would be a 'triple rail 2550W with 850W rails'.
Hope this helps.
Please if possible understand what is going on before applying power.
Internet advice can be faulty even with good intentions!!!
YMMV
