24Kilo, I'm pretty committed to the RPis as controllers, have had one running over 3 mos with Minepeon and a OSM, it's been rocksolid. The Starminer support team has been very responsive and I'll know in about 10 hours whether their suggested fix worked or not. If not, I will look into the jmordica fork of cgminer or Scrypta. I know the G-Blade is not at fault for the buffer overflow, ran fine for several days on my Laptop using Windows 8.1 and a modded CGMiner 3.7.2 with no problems.
cee009,
Not a problem... I know plenty of miners that are very happy using the RPi as a controller.
"gridseed-options" : "baud=115200,freq=838,chips=40,modules=1,usefifo=0",
try adding the usb buffer variable -
usefifo=0 - as shown above... it helped to increase the stability of my systems... just not sure if Starminer uses the same .conf commands and variables at cgminer.