Re: BFGMiner 4.3.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, auto-solomine
I'm glad to hear you were able to find a working solution for your hardware. To answer your question, using BFGMiner (with or without MultiMiner) I get 2.84 Mh/s per board with 0% HW errors on one and 2% on another. The effective hashrate is about the same (2.79 Mh/s & 2.86 Mh/s).
I'm still not quite sure from your posts what issues you had with BFGMiner. Your last post indicated you were getting the same performance I am reporting, but then you struck through the text.
I'm still not quite sure from your posts what issues you had with BFGMiner. Your last post indicated you were getting the same performance I am reporting, but then you struck through the text.
The problem I encountered was - when I posted my first response, I was getting 2.85mH/s with 2-3 HW's - I left the blades to work whole night - but next day when I saw BFGM(I ran the manual miner through MM) was mining at 3.xxmH/s and there were like 50-70 HW's per blade(and they kept increasing). So I had no other option than to quit. Of course MM has nothing to do with this, but there was no other option available in MM to replace BFGM(I have been using MM since I got my first 280x and it works like a charm for me).
Anyway, thanks
and I hope you get an alternative in MM for these blades if possible.Make sure are looking at the HW %, not the number / count. Most of these numbers are not directly comparable between CGMiner and BFGMiner. It's comparing apples and oranges.