Are you forgetting that alliedcontrol tested AM boards at 0.6w/gh at the wall?
BS
Are you saying allied control is lying?
No.
40G process is more sensitive to static leakage at high temperatures.
It's true to AM Gen3 and to our Hammer ASICs.
In the SP10, the Hammers are kept at about 110C
By using DT IC with SP10 boards, the system efficiency will improve by about 10% - 15% from the ASICs alone.
I don't have enough data to analyze the savings, if any, due to immersion of the PSU and DC2DCs.
By BS I've meant that you need to compare apples to apples.
Hammer is better than AM Gen3 in terms of W/GHs. I remind you that we EOL Hammer.
Regarding RockerBox: 28 HPM is considerably less sensitive to static leakage at high temperatures.