I just got a launcher today, plugged it all up, turned it on... And it just shuts back down after about one minute. If I unplug the launcher then I can get the pi to run, and was able to update it. I haven't been able to add a pool however, the page seems to freeze when I try.
Any ideas what I did wrong? Could it be the power cable that shipped with the pi?
my pi didnt load up that far on my original cable. Im not sure the pi power cable is the issue in your case but that would be a good starting point to look at
Thanks, I picked up a 5v 1.5A micro usb cable to power the pi with. The launcher unit still shuts down after a minute ish. Have not had a single hash as of yet. Still cant even add a pool or delete the one it came with. I'm starting to get worried something is faulty. The pi lights up and keeps running now that its plugged into a socket instead of the PSU, could it be the PSU?
It was listing "socket connect(127.0.0.1,4001) failed returning null" in the log before shutting the launcher down.
if you have a spare psu i'd try that, the more you can narrow down the faulty part the faster you can get to a solution
The only other PSU I have is in my PC, and that could be a problem to unplug everything, however Its 750W so same as the PSU I have, but its not modular.
I'm worried about the pi mostly, I should be able to at least just load the pi interface and add/change pool info, and I cant do that. Unless I'm missing something... Maybe I shouldn't have updated it right away. Can anyone confirm that it is possible to add pool info to the pi without the launcher running?
I decided I might want to format the SD card and install the software on it fresh, I plugged the SD card into my pac and its showing 18.7MB used and 37.2MB free. What the heck, isn't it supposed to be a 8GB card? The imagine you put on it is multiple gigs, I'm either doing something wrong, totally lost, or maybe the problem is this card. Hmm, maybe I need to go buy a new card and try this.