I'm working on cooling, but a friend beat me to it with the Novec 7100... Screenshot below showing comparison between stock cooling and evap. cooling/
He say's VRM's shut down from time to time at the voltage shown so confirmed 51A is the limit regardless of temps the OCP cuts in; he is running at 500 with one voltage setting above stock now without any problems.
He say's VRM's shut down from time to time at the voltage shown so confirmed 51A is the limit regardless of temps the OCP cuts in; he is running at 500 with one voltage setting above stock now without any problems.
and you guys didn't believe me
said it cpl times in here 
hehe@ user27
Is the warmer ASIC with the cooler VRM the submerged one?
If so a small heatsink on the ASIC also submerged might help lower current.
@crashoveride
I agree's with ya.
It's why I adjusted volts in both directions to determine lowest current with my setup.
Clicking on Apply changes on advanced page does not typically sleep VRM.
It's a low impact test.
YMMV