Re: [GUIDE] Undervolt antminer s1 [1.19W/GH at the wall]
Good thing I did the soldering part before drink #6. Brought back many memories of modding PS2's back in the day. 
...good times.
Software part was what messed me up. I couldn't login with putty after so long b/c the miner shut down or wasn't available. I panicked, thought I destroyed it = drunken, ranting post. Plus my batch 1 S3's still haven't shipped.
Can someone post a link or give info as to what the fields in LuCI mean?
From what I gather reading this thread, "HW" is errors. How are you guys calculating error %? I'd like to tweak it a bit for the best result...I soldered pot's in and adjusted each bank to 0.847V - 0.853V. Each Asic bank seems to have a balanced voltage output to maybe 4 Asics each(8 in the bank). I took readings from the capacitors(referred to as "yellow thingy" in this thread) and the capacitor below it.(they are polarized and I read from the side with the bar on it, it should be the + side of the Cap). Also, is there a way to restore the factory firmware? I may have drunkenly f00ked it with putty.
This machine is messed up from the start. It had HW problems before the mod compared to the 2 newer S1's I have. Also, my load hasn't changed much. The board is stamped with build date 2013/12/16.
Currently seeing:
11h2m uptime
139.xx GH/s avg.
14,562 HW.
Load 2.30 2.15 2.14.
All asics showing good(0's, not x's).
Kill-o-watt readings:
Amperage: 1.46A
Wattage: 170W
It's a lot better than the 3.3A @ stock 180 GH/s!!!
On a sidenote, I'd like to offer my sincere apologies for the Steve Jobs comment. I realize that some idolize him and think that he was great for technology(electronics). As a degreed tech guy, I see him as just a great marketer and the reason we have micro-transactions aka nickel and diming for everything nowadays. There is one thing we can all agree on... Steve Wozniak is a genius!! :cheers
...good times.Software part was what messed me up. I couldn't login with putty after so long b/c the miner shut down or wasn't available. I panicked, thought I destroyed it = drunken, ranting post. Plus my batch 1 S3's still haven't shipped.
Can someone post a link or give info as to what the fields in LuCI mean?
From what I gather reading this thread, "HW" is errors. How are you guys calculating error %? I'd like to tweak it a bit for the best result...I soldered pot's in and adjusted each bank to 0.847V - 0.853V. Each Asic bank seems to have a balanced voltage output to maybe 4 Asics each(8 in the bank). I took readings from the capacitors(referred to as "yellow thingy" in this thread) and the capacitor below it.(they are polarized and I read from the side with the bar on it, it should be the + side of the Cap). Also, is there a way to restore the factory firmware? I may have drunkenly f00ked it with putty.
This machine is messed up from the start. It had HW problems before the mod compared to the 2 newer S1's I have. Also, my load hasn't changed much. The board is stamped with build date 2013/12/16.
Currently seeing:
11h2m uptime
139.xx GH/s avg.
14,562 HW.
Load 2.30 2.15 2.14.
All asics showing good(0's, not x's).
Kill-o-watt readings:
Amperage: 1.46A
Wattage: 170W
It's a lot better than the 3.3A @ stock 180 GH/s!!!
On a sidenote, I'd like to offer my sincere apologies for the Steve Jobs comment. I realize that some idolize him and think that he was great for technology(electronics). As a degreed tech guy, I see him as just a great marketer and the reason we have micro-transactions aka nickel and diming for everything nowadays. There is one thing we can all agree on... Steve Wozniak is a genius!! :cheers