RIGHT GUYS, mu router Gateway is 192.168.0.1.

1. I have been inform that ALL i have to do is alter the miner  address to 192.168.0.xxx(on next doors router take 2 mins) - Is this correct???

2. I always seem to have to alter the Gateway ip for ALL miners to 192.168.1.1 do i do the SAME for all the miners on the 192.168.0.1 routers ??
 
If the miner's IP is 192.168.1.x,the router gateway IP must be 192.168.1.1;If there are many miners connecting with the router gateway 192.168.0.1,you have to change miner IP into 192.168.0.x:

step 1,connecting the miner with your laptop by one internet cable directly,change your laptop TCP/IPv4 gateway into 192.168.1.1,set your laptop IP into 192.168.1.2;

step 2,then open the miner controller in your laptop IE,to set miner's IP into 192.168.0.x;wait for 1-2minutes,then connecting the miner with your gateway router 192.168.0.1,then the miner controller can be open.


Cheerss Zeus, i'm cluless with ip/gateway tcp/ipv4 !!!!!!!


I just plan on connecting to MY network, altering  the details to -

IP 192.168.0.99 ADD:   Subnet Mask:255.255.255.0    Gateway IP:192.168.0.1   DNS: 8.8.8.8

Then select - SET NETWORK

Then taking next door to my mates ....I think thats easier for me !!!     lol