Re: ANTMINER S3 Discussion and Support Thread.

1. why is your pool info repeated twice?
2. remove stratum+tcp://, just keep stratum.mining.eligius.st:3334
3. maybe add a second pool

save and apply

wait until it beeps, then check

Sorry, pasted twice by accident...

I tried removing the stratum+tcp://, no change... no beeps either...

Also, when I try diagnostics, tracert and ping both fail. reports Network unreachable...

My WAN shows activity, my LAN shows no activity and is set to DHCP... Should I be changing this to a static IP address as well as the WAN address? (two different IP's???)

is your router on 192.168.1.1?
do you have other miner that might be on 192.168.1.99?
bold numbers should be the same for router and miner, but could be different from standard

Good call Bio, bytechanger, log in to your router (what router/broad band provider is it?) and check the Default Gateway setting.

My router for example is 192.168.1.254 (most common is 192.169.1.1) - you need to set whatever this 'Default Gateway' ip address from your router in you miner config 'gateway' address.