Hi,
Is anyone able to help me out? I purchased 2 of the S3's and bought the Enermax Triatholor ECO 550W 80 Plus Bronze PSU (one for each S3). It says the DC output is +12V 42A 504W. I hooked one PCI-e connector to one side of the machine and hooked up another PCI-e to the opposite side using only two of the four connections. The machine never reaches over 330 - 340 GH/s. Do I need to overclock this machine to reach the 478 GH/s, or do I need to buy a bigger PSU, or both? If I need a bigger PSU which is recommended?
please post your miner status page
Here are my miner stats
Something is off with chain 2. I've never seen that with the -o and it should be 16 not 32. What happens if you swap the PCI-e connector? If they chains swap info I'd say you have a PSU problem. If they stay the same I would think it's the miner.
The chains stayed the same. I plugged in my second miner and it actually works the way it is supposed to. I switched the PCI-e's to the other two and everything stayed the same with the ASIC. Hooked up the 2nd PSU to the broken miner and still the same problem.