Hello miners,

I recently bought Antminer S3 and after all required setting configuaration the miner remains in standby mode (Red light off and green light blinking per second).
Here is all required information:

--my ipconfig is: --

Wireless LAN adapter Wireless Network Connection:

   Connection-specific DNS Suffix  . : westell.com
   Link-local IPv6 Address . . . . . : fe80::fd99:662:caa3:612%12
   IPv4 Address. . . . . . . . . . . : 192.168.0.193
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.0.1

Ethernet adapter Local Area Connection:

   Connection-specific DNS Suffix  . :
   Link-local IPv6 Address . . . . . : fe80::2557:f20c:960f:e444%11
   IPv4 Address. . . . . . . . . . . : 192.168.1.250
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.0.1
-----------------------

My router ip is 192.168.0.1


--ANTMINER S3 Miner's WAN Configuaration--

Protocol - Static
IPv4 address - 192.168.1.99
IPv4 netmask - 255.255.255.0
IPv4 gateway -  192.168.0.1
IPv4 broadcast - 192.168.1.255
Use custom DNS servers - 192.168.0.1
----------------------------------------------------

Also when I insert the ethernet cord from Antminer S3 into computer's ethernet port, will it start mining if the configuration is correct? Or I have to remove the ethernet cord from computer and insert it into router?

Please help!
Thanks in advance.