I see the update. But it's for 1.4 (not 1.6)
Any Problem with updating the Software? Don't wanna scrow up the new miner ;-)
No. I'm from the "cold" Switzerland ;-) Temp right in front of the Miner is right now 23°C
But when I had the Miner flat on the table the temp was showing 100°C. So it is changing ...
I think you have to update to 1.4 before you upgrade to 1.6.
I have done both with no problems. What changes where made.. NO idea.. no one has said..
Also to note On the bottom of the Manual (
http://blackarrowsoftware.com/download/X-1%20Prospero%20(Control%20Board%20-%20Original%20Design)%20User%20Instructions%20v1.3.pdf ) it says:
"Note that device is designed to be placed on the side, vertically. Blocking the airflow vents may cause device to overheat and prevent it from working properly."
See the picture under II. This is how it should be standing.. not like the picture up the top of the Manual
its around 23C here at the moment in the house. and my temps are as I gave before.. I think the exactly 60,80,100 temps are just made up..