Ugh. 10 hours in and Ant1 fell to 411Gh at 218 and Ant2 fell below 400Gh as expected. I wish Bitmaintech would include an option to auto-restart in the firmware. Thinking about creating a small cronjob to do just that...
Same here. After a reboot, they start hashig to specs, the longer the run, the slower they get. Both on web Interface and pool. Not temperature related.
Strangely sometimes i have to reboot them several times to get them working good. Seems i need to hit some
sweet spot with reboot or they are slow.
it is temp related but not asic chip temps .
it is the r47 part above the asic chips that is getting too warm. and it is not measured .
I would love someone with a to measure the r-47 part on and s-1 and then use a temp probe on the r-47 inside the case of an s-3 to give the temp
my guess is the r47 part on s-1 is 2-5c cooler then the ones on the s-3