I just mod my fury!
Change power supply to 12V 20A
Add copper heatsink 8X8X5mm
change thermal paste with artic 5 silver.
make lot of hole on the back and andd 12cm fan.
Add 43kohm on paralel with R7 (1.43V)
@381mhz i have 1680Mh/s (dev HR) on minera and 1500 1800 Mh/s for Pool Hashrate with 5% error for now.
temp seems lower than original setup.
A 43Kohm resistor parallel with the stock 9.2Kohm should = 7.5Kohm.
Going from the 2nd post, that would come out to 1.3v not 1.43v?
Just checking because I want to keep the watts as low as possible and get that stable 381 clock before I mod the rests of my Blizzards.
*Edit: the mod with 5.6K worked but wow, the watts...