Post
Topic
Board Mining (Altcoins)
Re: Swedish ASIC miner company kncminer.com
by
samsonn25
on 30/07/2014, 06:46:01 UTC
For those in my boat with a corsair 1200i they may have considered for use on the Neptune (don't work see post below) and or the Titan (see post below)

I got this reply from Kurt at KNC Forums...so definitely don't get this for the Neptune and probably not a good idea for the Titan either

again for people in my boat who may have one of these lying about ..they 'thought' they could likely use with the Titan...er not looking likely now imho

Kurt's reply to my question on the corsair 1200i and its use with a Titan...1st line is in regards to the Neptune...2nd line is in regards to the Titan....

I quote:

"To answer your additional questions, the 1200i is a multi rail power supply that cannot handle the frequency set at 425MHz, there is no fix for this as the power supply is inadequate.

We do not know the exact specifications of the Titan miner yet, so it is best to wait until final specs are released."

end quote:

Anyway just a heads up to those having these corsair 1200i units they planned to use with Titan (or Neptune) ...and/or to those who were gonna buy such.

Probably that would be a bad call imho...

anyway for your consideration

Searing


I've got my Neptune working with a 1200i for 2 cubes and a 1500i for 3 cubes. I added another header to PCB and running 2 cables per cube. I will post some pictures when I get a chance. I didn't have to raise the cover on my mod... like I saw some others on here did.

This is nice:

The 24-pin ATX and all EPS and PCIe connectors use 16AWG gauges for lower voltage drops. All others utilize 18AWG wires.