Re: The Habanero - 650GH/s - Batch 2 Shipping June 9th, $850 ($1.3/GH/s)
...
Had a look at Cgminer from JakeTri and in Read ME file I can't see any voltage settings
Had a look at Cgminer from JakeTri and in Read ME file I can't see any voltage settings
Here is copy and paste with relevant information from ASIC-README file from https://github.com/jaketri/cgminer
Code:
--hfa-options Set hashfast options name:clock@voltage0@voltage1@voltage2@voltage3:clk0:clk1:clk2:clk3
This command allows you to set options for each discrete hashfast device by
its name (if the firmware has naming support, i.e. version 0.3+). Currently
this takes as option the clock speed, 4 voltages and 4 clock offsets (voltage and
clock offset for each of the 4 cores of the ASIC)
e.g.:
--hfa-options "rabbit:650,turtle:550@800,bee:950@905@925@975@985:-100:-50:0:25"
Would set a device named rabbit to clock speed 650 MHz using default voltage, the
one named turtle to 550 MHz using a voltage of 800 mV for all cores and the one
named bee is set with different clock and voltage for each ASIC core as following:
> core 0 at 850 MHz (950 MHZ base clock with -100 MHz clock offset) and voltage of 905mV
> core 1 at 900 MHz (950 MHZ base clock with -50 MHz clock offset) and voltage of 925mV
> core 2 at 950 MHz (950 MHZ base clock with 0 MHz clock offset) and voltage of 975mV
> core 3 at 975 MHz (950 MHZ base clock with 25 MHz clock offset) and voltage of 985mV
Starting the device at a speed where it is most stable will give more reliable
hashrates long term and prevent it interacting with other devices, rather than
depending on the clockdown feature in cgminer.
Note: Setting voltage may cause a board reset and hotplug event on cgminer startup.
This command allows you to set options for each discrete hashfast device by
its name (if the firmware has naming support, i.e. version 0.3+). Currently
this takes as option the clock speed, 4 voltages and 4 clock offsets (voltage and
clock offset for each of the 4 cores of the ASIC)
e.g.:
--hfa-options "rabbit:650,turtle:550@800,bee:950@905@925@975@985:-100:-50:0:25"
Would set a device named rabbit to clock speed 650 MHz using default voltage, the
one named turtle to 550 MHz using a voltage of 800 mV for all cores and the one
named bee is set with different clock and voltage for each ASIC core as following:
> core 0 at 850 MHz (950 MHZ base clock with -100 MHz clock offset) and voltage of 905mV
> core 1 at 900 MHz (950 MHZ base clock with -50 MHz clock offset) and voltage of 925mV
> core 2 at 950 MHz (950 MHZ base clock with 0 MHz clock offset) and voltage of 975mV
> core 3 at 975 MHz (950 MHZ base clock with 25 MHz clock offset) and voltage of 985mV
Starting the device at a speed where it is most stable will give more reliable
hashrates long term and prevent it interacting with other devices, rather than
depending on the clockdown feature in cgminer.
Note: Setting voltage may cause a board reset and hotplug event on cgminer startup.
Many thanks
I didn't look at that file
Unfortunately it doesn't work
No surprise Folder does not contain cgminer.exe file and when I insert this:
cgminer.exe --usb HFA:1 --hfa-name HFA3 -o eu-stratum.btcguild.com:3333 -u -p 123 -o
stratum+tcp://stratum.d7.lt:3333 -u -p 12345 --hfa-fan 100 --hfa-temp-target 0 --hfa-
temp-overheat 104 --hfa-fail-drop 0 --hfa-options HFA3:537@860 --api-listen --api-port 4030
just black screen flashes and that's it
What I'm doing wrong ?
Did I download wrong file ?
Should I copy cgminer.exe from normal cgminer folder ?
Thank you very much for your help
Update
I have copied cgminer.exe from cgminer 4.3.4 folder and I'm getting error lib.dll
