Anyone seeing Zero Hash rate in the GUI? I checked a couple other addresses too.
My miners report they are doing work.
The hashrate information on GUI is now back, but I restarted my 19 Gridseeds , because one of them was down.
I started 14 Gridseeds about 1 hour before and it´s showing.
Whats your rejection rate?
Between 0.1 and 0.3% and the hashrate is 6.6Mh/s. My Gridseeds are not modded and running with 850MHz.
Strange since i added a second powered Hub (LogiLink oder one is D-Link) i get lots of Hardware Errors with 850 Mhz very quick
And with 800 Mhz smooth as silk and Gridseeds running very cool, with 850MHz very hot.
Maybe the new hub is the culprit or 14 Gridseeds are too much for my RasBerry PI.
I have only 1-3 Hardware Errors with 800Mhz in 24 hours , with 850Mhz they keep flowing in after seconds.
My experience with D-Link Hubs are strange too! I found out, that the D-LINK DUB-H7 Hardware-Rev B1 is excellent (Made in Taiwan), but the Hardware-Rev. C1 (Made in China) is scrap! I used this Hubs with my Antminer U1.