thanks for the guide
The power cord you recommend :
SF Cable, 10ft 16 AWG Universal Power Cord - IEC320 C13 to NEMA 5-15P SJT 13A
http://www.sfcable.com/P7C16-10.html
this looks like a regular PC power supply power cord , comes standard with my 1300Watt PSUs ?
is'nt this only for 110v?
what cord would be needed to run this miner off a 200-240 Amp receptable ? would you need a PDU ?
You'd need a cord that goes from whatever kind of recepticle you have (6-20p L6-20p or L6-30p would be common but not the only options) to C13. However since it has two PSU's, you'd need a splitter, which might be difficult to find with enough amp rating, or you'd need a PDU.
I was planning on using two separate outlets on different breakers thats not a problem running the numbers honestly running an SP30 at 4.1 TH at 2600WATT actually
running the numbers provides a better hash/Watt number than 4.5 TH at 2900WATT, not sure what all the big deal with maxizing the hash ratio to all ends is. Hash/Watt
is what matters in the end.