I have G-750 SeaSonic 80 gold powering up 2x S3 miners. After couple of hours, one of the antminer started getting some HW errors. Is this because one of the blades i connected with daisy chain?
what are some hw errors
5
10
100
1000
10000
1000 errors a day are not too bad.
both have been running for 13h+ now, first one has 57 HW and second 166.
You can use this formula to calculate percentage of hardware errors, I generally consider <=0.3% an acceptable level when hashing at stock.
(HW + DiffA + DiffR) / HW * 100 = %HW
Ooops: HW / (HW + DiffA + DiffR) * 100 = HW%
Even better is this http://www.coincadence.com/antminer-s1-hardware-error/ its a web based calculator for figuring out HW error, it uses the same formula but you don't have to do the math. Quick Tip. You can't leave a blank value, use 0 if the value is 0.