AMT,
Sorry my last message was confusing. Here is the status.
4 cards are hashing.
Top card has no lights and seems dead. Is there something we can check to see if its initializing correctly?
Thanks in Advance.
Yes, unscrew the side and make sure the top card's two connecting cables are plugged in tightly, sometimes they can come loose in shipping. Also check the other end of the cards cable as the based of the motherboard, just follow it down and make sure that's plugged in tightly as well.
AMT,
Yes, made sure the two cables on top were tight. To be clear, one is a ribbon and the other is a power cable.
I also swapped out the power cable with the one below it (since it worked) and verified that the power cable is good.
Also swapped out the ribbon with the one below it and still same issue. No lights are coming on the top card and it does not show up in the interface.
Let me know what else to try.
Thanks in Advance.
Turn off the miner, unplug one of the other boards and plug it into module which isn't lighting up, leave another card unplugged, turn it back on. <- Thinking electric now. Do the same with the ribbon cable from the unplugged card.