I requested refund before they started shipping which was refused. The fire hazard miner was then delivered weeks late. RMA was refused on dead dies on the grounds that the remaining dies were running slightly over 3TH. To top it all off this is now 2/5 cubes burnt out with 16AWG cables.

KnC have two arguments in this regard;
1. Low quality cables
2. Improperly seated cables i.e. not all six pins making contact

Real world;
1. Clearly not a low quality cable with 16AWG; it's a design issue where each 50w pin is expected to handle >100w
2. As shown all three of the positive pins burnt, not just two, as it would if one of them wasn't seated properly

I have been lucky so far in that my house hasn't burnt down yet.

If *everybody* could post this link on the KnC fourms *every day* that would be good, thanks. https://bitcointalk.org/index.php?topic=170332.msg8498317#msg8498317

...and now for lots of nice high res photos:





Since KnC didnt bother to respond to me, let alone RMA, last time this happened; here's some warranty voiding nudes:



(nice to see they wrote "2014 KnCMiner" right alongside the socket so there is no confusion)

u27