@Nikethemutt

When you get the miner in the mail, open up, check cables/connectors inside the miner and TIGHTEN UP ALL SCREWS ON THE HEATSINKS(They loosen up in shipping and don't transfer heat properly so after a few hours you get a demished hash rate if you don't do this). Put cover back on and start mining 24/7. You should do this with any miner before you plug it in. I work offshore for 28+ days at a time and it's all good. I would let run for 24 hours and check before you leave for your trip.(Check for stable hash rate and make sure psu cables/plugs are not getting too hot.