Re: Announcement: Bitmain launches AntMiner solution, 0.68 J/GH on chip
Help please.
I use allways 2 psu for each of my S3. 1 psu for each blade. Lately one of my S3 turns of in the sideof the controler board. Today it happened again. When i went to take of the psu to check it it was melted and couldnt take it off without cut the wires.
I use the same model psu's for other antminers S3 and never happened that. I also cross green and black wire and never got problems with that.
Does anyone knows why this could happen?
Thank you.
I use allways 2 psu for each of my S3. 1 psu for each blade. Lately one of my S3 turns of in the sideof the controler board. Today it happened again. When i went to take of the psu to check it it was melted and couldnt take it off without cut the wires.
I use the same model psu's for other antminers S3 and never happened that. I also cross green and black wire and never got problems with that.
Does anyone knows why this could happen?
Thank you.
In addiction the psu i use in each blade is about 600w
I can only tell that I've been using this PSU to power each of my S3, one connector per blade, without any issues:
http://www.corsair.com/en-us/cx-series-cx600m-modular-atx-power-supply-600-watt-80-plus-bronze-certified-modular-psu
And I overclock them to 500 GH/s
