Utility = Shares per minute ( Utility*4.29/60 = Prf 
)
PwrDn = Power Down ( Chip with "." status )
ForceLP(Long Poll) = Force the board to accept a new job ( the board is doing nTime rolling by itself )
ReClock = Adjust time difference between local and pool
These two buttons are better removed... no one actually need them.
Real_LP = Guess should be the actual forced LP, but the number seems too small here...
RS = ReSync ( indicates errors on data cable)
RC = ReConnect ( reconnect to the pool )
Cmd/s and Ans/s are both looks like stats for the communications between boards and controller
RollNtime[ s] = How many seconds the board should change on nTime ( bigger means less communications to controller, default value should be OK)
WakeUp period[ s] =
Normal/Smart[0/1] = Firmware version would change, but I can't see any difference in hash rate
)PwrDn = Power Down ( Chip with "." status )
ForceLP(Long Poll) = Force the board to accept a new job ( the board is doing nTime rolling by itself )
ReClock = Adjust time difference between local and pool
These two buttons are better removed... no one actually need them.
Real_LP = Guess should be the actual forced LP, but the number seems too small here...
RS = ReSync ( indicates errors on data cable)
RC = ReConnect ( reconnect to the pool )
Cmd/s and Ans/s are both looks like stats for the communications between boards and controller
RollNtime[ s] = How many seconds the board should change on nTime ( bigger means less communications to controller, default value should be OK)
WakeUp period[ s] =
Normal/Smart[0/1] = Firmware version would change, but I can't see any difference in hash rate