Re: [DIY] - Reward $100 | Antminer S1/S3 Blade on Raspberry Pi

Quote from: shadow2 on September 10, 2014, 03:41:26 AM

2 wires in the UART - specifically 3 & 5 (4 is an earth/ground)

I'm pretty sure though by at the cable to the blades it's serial comms

http://ww1.microchip.com/downloads/en/DeviceDoc/61107G.pdf

it seems to go moving away from the blade

UART - MCU - USB hub

Again, something interesting here. thanks for sharing.