Hi there, I have a new type mini terminator.
I can't get it to work.
The raspberry pi reports "no any A1 board"
I have an 850W PSU. I am only connecting 6 pin pcie
When I power up with the pcie and the atx plugs both connected the fans do not spin, they only work when only the atx cable is connected. I am able to find the web interface but I cannot get to mine, can anyone please help?
Here is a pic of the pi output, I assume it doesn't need plugged in as well, since it seems to be running?
https://www.dropbox.com/s/dubjloxwaf0n0ud/IMG_1251%5B2%5D.JPG?dl=0Yes, you need to use a PSU with two of the 8pin EPS CPU cables just as the poster before me stated. I had the very same problem and it sure doesn't help that there isn't ANY Info available for it and Zoomhash was insistent that it used PCI-e Cables. Once I was able to get a PSU w/ the 2 8pin CPU cables and a new IMG for the Rasberry Pi it worls great at around 35-37MH/s ....I had MANY wasted days not mining because Innosilicon hadn't given Zoomhash a copy of the Rasp Pi IMG and it wouldn't work using the old version A2 Mini as it uses More Chips per board.
Good luck to you! Atleast it mines great and runs super cool once up and mining!
