Re: M's Ant (S1/S2/S3) Monitor v3.3: alerts,auto reboot,mass reboots,multithreaded
Remember i upgraded my cgminer as well to this version which makes the rigs much faster in response times -
CPU load now is about 90% instead of 99-100% with old cgminer. WebGUI is a bit quicker. Niiice!
p.s. I suspect that it will not work for S2?..
It is valuable to note, also in doing this - my rigs have really settled down and require far less intervention. All 16 now running this version - my S3's are batch 2 and batch 3
Here's what I've used and it started hashing as usual.
1. SSH into the S3 and login
2. Issue the following commands sequentially.
a) cd /usr/bin
b) mv cgminer cgminer.bak
c) wget http://ck.kolivas.org/apps/cgminer/antminer/s3/4.6.0-140908/cgminer
d) chmod +x cgminer
e) reboot
Confirm. Both my S3s Batch 7 were upgraded well this way.1. SSH into the S3 and login
2. Issue the following commands sequentially.
a) cd /usr/bin
b) mv cgminer cgminer.bak
c) wget http://ck.kolivas.org/apps/cgminer/antminer/s3/4.6.0-140908/cgminer
d) chmod +x cgminer
e) reboot
CPU load now is about 90% instead of 99-100% with old cgminer. WebGUI is a bit quicker. Niiice!
p.s. I suspect that it will not work for S2?..
It is valuable to note, also in doing this - my rigs have really settled down and require far less intervention. All 16 now running this version - my S3's are batch 2 and batch 3
That might be the missing combination. I don't think I put cgminer 4.6.0 on that firmware yet.
M