I think it's you who should check your facts. I have installed antMiner_S320140826.bin (latest firmware on the Bitmain S3 support page) and am pretty sure that it does include 100M and 500M because I am currently using 243.75M. If you're still not convinced, then that's your problem; sorry for trying to help out. This was posted on the prior page, just before your post:
https://bitcointalk.org/index.php?topic=671189.msg8882222#msg8882222Just for shits n giggles becaise it proves ME right about 243.75, so whos checking whos facts now ?
https://bitcointalk.org/index.php?topic=699064.msg8370071#msg8370071(Here are highlighted in red the lines with new frequency
not included in the stock firmware.)
MBW, you are thinking of the next-to-latest firmware. The last one before the S3+ firmware does not have the 243.75 setting, but the one for the S3+ (and S3 works fine with, too) DOES have 243.75. I have one S3 with each.
Ok, so technically me and visdude are both wrong so apologies here.
You were wrong; I wasn't. You did say "new firmware" which, for all intents and purposes, means the "latest firmware". You're firmware description was obviously wrong but my interpretation of your firmware description was correct.
Accepting your mistake is commendable but to drag me into it is not cool especially when my intention was to help you out sincerely. Again, be brave and accept your mistake on your own; don't drag me into it.
https://bitcointalk.org/index.php?topic=671189.msg8883401#msg8883401