kabopar said ,
I installed this upgrade yesterday.  Used the latest firmware (antMiner_S320140826.bin, do not tick 'save settings').  After re-flashing the firmware it returns to 'default' settings  (IP 192.168.1.99 and the test pools).  You cannot leave both miners at this IP, so you'll need to re-configure the network WAN addresses and your pool configuration. You also need to select the frequency settings at Miner Configuration/Advanced settings, 'save & apply'.  In the odd case of a 'stubborn' miner, you might need to perform a system reboot  (System tab, reboot, click on 'perform reboot').  My upgrade went smoothly and both S1's are now functioning as S3+.


i probably the only one who's using wireless on 10 of my miners my router would normally resign a diff ip  is that gonna make a difference