Hi Zvi,

My SP30s Units have shipped, I just wanted to get your input regarding overclocking before they arrive.

I'm thinking of the settings below please let me know if you think the units will work fine:

FAN: 100 Maximum
Voltage: 0.780V
PSU Top: 1385
PSU Bottom: 1385
The unit will learn lower settings over time for PSU. The fans at 100% is too much unless your input temperature is the limiting factor - it will just waste power. I don't recommend touching settings unless you have specific problem. maybe just increase starting voltage to 0.680 - it will improve start time
What is the maximum safe temperatures that the ASIC chips should run at? I'm reading the user manual and on the last page there is a screen shot of 85C and 105C, does that mean that I should ensure the temps don't go above 105C or will they be ok to up higher? if so how much?
125 is the high limit. Any number under that is ok as long as you get good hash rate

Any further information that you think will help in the overclocking of the SP30 would be much appreciated. I'm not much of a technical person but I can try.
The SP30 arrive overclocked to maximum by default, then they learn and downclock to match environment
By the way the screen shot in the user manual also shows some chips as disabled:

12:disabled (Stuck DLL)
22: disabled (Stuck DLL)

Would that mean that the ASIC is not working? what if that happens to use what do we do?
Sometimes HW gets damaged in shipment. You should contact us and we try to resolve the issue.
Thanks Zvi.