Some tips for ppl who is setting up titan
1) ribbon cables got two side, they are not the same
2) sometimes the pcie slot might be fucked up, make sure testing all of them on the controller
3) don't forget update the firmware to 1.02
4) you are able to use more than one psu to power them ( i am using 2-3 psu for one titan)
5) firmware is kinda unstable atm, using auto-switch pool might cause a 40% drop of hash ( not sure yet )
1) ribbon cables got two side, they are not the same
2) sometimes the pcie slot might be fucked up, make sure testing all of them on the controller
3) don't forget update the firmware to 1.02
4) you are able to use more than one psu to power them ( i am using 2-3 psu for one titan)
5) firmware is kinda unstable atm, using auto-switch pool might cause a 40% drop of hash ( not sure yet )
what pools are people using so i can just skip the frustration (assuming I can "get it up' so to speak ....Titan I mean!)
*hey...there was a day when i'd get some asic hardware and get a bit of a 'asic woody' alas ......those days seem
be gone with the stress of getting them going*
i can still remember you Searing, you helped me quite a lot when i first got my jupiteri am using wemineltc atm
but i will test those auto-switch pool after i set up all titan on hand
remind me how I helped (i need the encouragement with my Titan NO ROI from KNC)
just to show you how life works I ordered the cable(s) from www.shakmods.com they arrived I forgot I ordered them for corsair 1200i and now I decided to use
as KNC recommends "two 850w power supplies' so I just ordered (2) Seasonic ss-8602ps 860w units instead...contacted www.shakmods.com to ask how badly I'm screwed...hoping these corsair cables will also work on the seasonic (not hopeful)
so beware all any advice I may give.....i bought stuff from BFL (did after a year get my full $8.5k back by pure luck) and a KNC NO ROI Titan ...so any advise should
be taken with my limited mental facilities in mind!
FML
Searing