Anyone is experiencing the restarting issue getting worse?
Yesterday I had restarts every 2-3 minutes avgr. in ~200mhz for a Titan over a couple of hours.
Today its not even running 10 sec. before restarting avgr. in ~50mhz for a Titan. On every pool I try. This is also independent from the count of Cubes connected?
Yesterday I had restarts every 2-3 minutes avgr. in ~200mhz for a Titan over a couple of hours.
Today its not even running 10 sec. before restarting avgr. in ~50mhz for a Titan. On every pool I try. This is also independent from the count of Cubes connected?
are you sure all cubes are working?
Some tips for ppl who is setting up titan
1) ribbon cables got two side, they are not the same
2) sometimes the pcie slot might be fucked up, make sure to try every single spot on the controller
3) don't forget update the firmware to 1.02
4) you are able to use more than one psu to power them ( i am using 2-3 psu for one titan)
5) firmware is kinda unstable atm, using auto-switch pool might cause a 40% drop of hash ( not sure yet, but i am fine with WeMinerLtc )
Yeah - I saw your hints earlier and tried almost everything.
1) Cables are plugged in in the correct direction
2) All slots seem to work, I hashed >300mhz yesterday for a couple of hours (with reboots every 2-3minutes)
3) Firmware didnt correct the restarting issuw
4) I use 2x evga 750W, Power draw @Wall ~1300W
5) I tried every pool, so far only the pure litecoin pools work
Thing is - I didnt change anything since yesterday - but now BFGMiner is restarting every 10 sec.... (----> which leads to an average hashrate of ~50mhz for the whole Titan)
not sure if this matters with your power supply but are you using Y adapters?