well for those of you with problems with bfgminer restarting and cubes...there is something I read about the Titan working well on the
liteguardianpool pool and that pool having an asic ready port on it you can toggle...and someone with a Titan said they used it and it works to solve the problem
no idea what thread it was obscure
anyway that and his titan was pulling 1550? w at the wall and he is uing 1300w power supplies
so with that over kill he managed to get 300mh out of his cubes with that and other tricks
here is the link just found it
https://litecointalk.org/index.php?topic=22290.msg0#newanyway hope this helps you all ..my Titan is not here yet....expect to hear me howl as well on here soon
(all frigging rocket science on here I can barely put an Ikeda Swedish end table together and am expected to put a damn Swedish DIY Titan together.
This is gonna drive me nuts!)
Looks like the Titan miner firmware is pretty much the same at the Neptune. My guess would be if someone goes into Advanced they should see what the power consumption is. On my Neppy at 475Mhz its consuming 1450W so it says but I know its consumes about 1450~1600W. If I stick on a single 15AMP circuit the breaker goes, but everything is good on two 15AMP circuits.