KORE VoIP DIRECTIONS




KoreCoin Windows - v2.2.9.1:VOIP-ALPHA
https://mega.co.nz/#!AcNXnSQD!4JGdFySEFyh8RMWPjMsoaYfCbpCTG4wilBU_afKsSNU


NEW, when you click the other "Call Buddy" it automatically registers you.
Other than that continue using the same setup process in the video etc. found below.




Video Tutorial for Direct Calling Only, Not using Buddy List:
https://www.youtube.com/watch?v=HzWDAnVEHoE&feature=youtu.be

OR, You can Follow the Listed Directions Below.
ALPHA is Testing Mode so Report all "NEW"  Bugs to Eurbids.


FYI:  If you Router supports UPNP you don't need to forward
the SIP Port 5060 manually, UPNP does the work for you.
If your Router doesn't support UPNP Then Voice will only work in one direction.
This means you have to forward the port 5060.

STEPS: #1-3 for Direct and Buddy List Calling Setup - Use Direct Calling
1-Go to the "Receive Address Tab" and create a new address.
Label it however you like. Might makes sense to designate it your VoIP Address.

2-Right Click the Address and choose the bottom option "Set VoIP Account".

3-Go to "VoIP Calls" tab and click on the "REGISTER" box.

STEPS: #4 and #5 for Direct Calling Only:
4-Enter the Address you'd like to call in the "Direct Calling/IM" box near the bottom.
You will see two tiny boxes on the right. Click on the "Left Tiny Box" to dial.
(TO REGISTER ONLY:  Click the "Call Buddy" box)

5-Watch the "Call Status" box, You will see it say "Calling".
Whoever is Receiving the call has to accept the call by clicking "Answer Call"
that will show in the box above the "Call Status" box.

To hang up simply click "Hang Up".