Finally my GTX980 arrived , its pritty nice looking one. Would you guys help me with little improovement with the ccminer. I was rtring it on XCN ,but there must some more setting fot this card.
Do you have nvidia inspector can you check at what pstate your gtx980 run (what brand is it ?)
if it runs at p2, the mem clock is probably below optimal value.
This is just a blind stab as I don't have any 900-series cards but have you tried -forcepstate:0,0 shortcuts with inspector?
I think I tried, but as soon as ccminer start, it goes to p2, ccminer definitely trigger this p2-state.
I will have a look into the management API to see if I can do something (however it is still possible to overclock in p2 but the max value for the mem clock is the standard one...
I had 2x970 SC cards, now I´m with two 980 cards overclocked, when running nvminer/ccminer both cards read 1500MHz at memory speed, is that the limitation in ccminer you are talking about, it limits the mem clock at 6GHz max. to the 900 series?
Other aplications use my OCed memory clock (8GHz instead of 6GHz in CCMiner).
Cheers