Hello
So I have 4 x S3 miners coming next week and Im just about to buy the power supplies. I was thinking two Corsair HX850 (850Watts), only snag is they have 6xPCI-E 6 connecters and the miners take four each. Would like to over clock them abit and concerned the wire will heat up to much.
http://www.corsair.com/en-gb/psus/hx-series
I know they can run on 2, Im wondering if I could connect three to each miner or will it only work in arrangements of 2 or 4?
Looked at this guide which is great but isnt that detailed.
https://bitcointalk.org/index.php?topic=702653.0
Cheers
So I have 4 x S3 miners coming next week and Im just about to buy the power supplies. I was thinking two Corsair HX850 (850Watts), only snag is they have 6xPCI-E 6 connecters and the miners take four each. Would like to over clock them abit and concerned the wire will heat up to much.
http://www.corsair.com/en-gb/psus/hx-series
I know they can run on 2, Im wondering if I could connect three to each miner or will it only work in arrangements of 2 or 4?
Looked at this guide which is great but isnt that detailed.
https://bitcointalk.org/index.php?topic=702653.0
Cheers
Its better to buy an server PSU wich is more efficient more reliable and much easier to exchange when the break down. All you need is a server PSU + a breakout board.
I have got an IBM DSP2000 PSU wich can go to 2500W or 200A on the 12V rail.. no PC-PSU can beat that (bought it for $ 45)