how to use feature "remote" ?
1. Read back a few posts for the announcement for version 1.5.0.
2. Read the first post which gives an overview of the whole application.
i want to know about how to lookup other pc in my network? because i already do that setting same first page but see only 1 pc
I'm not sure what you are asking but let me throw out a few things.
If you are not seeing any output at all try setting remotesend and remotereceive both to true on the same instance. Start up a miner and you should see the same output in both the console window and remote window.
If that works, set remotesend to true on your second machine and start a miner. You should see output in the remote window on your first machine. If you don't, it could be an issue with your network.
This program uses multicast traffic with a timetolive of "1". That means the traffic will not pass through any router and will only stay on a single network subnet. Additionally, some older or very cheap network switches may not pass multicast traffic. Some more expensive smart switches won't pass multicast traffic unless they are specifically configured for it. In my experience, newer cheap switches handle multicast just fine. Between my two systems at home there are three switches, one D-Link and two Trendnet, and the packets are coming through fine.