Hi Sam,
If you could, pleaes power off the S1, then turn it back on. Wait for about 4 minutes, then could you please copy and paste the entire SYSTEM LOG for S1?
if you could, lets test the S1 control PCB first. Remove the S1 control PCB and place it on the working S1 and see if it hashes.
If the control PCB is good, then remove one of the questionable hashing PCB and connect it to the known working S1, and see if it hashes.
Repeat 1 more time with the other PCB.
If any of them shows problem, then you 'll know it is the damaged item. Contact the seller and ask for exchange or refund.
Hello,
Another noob here with a problem getting my S1 working. I hope this is the right place to post.
I got my third S1 off ebay recently, and while the first two worked just fine, I can't seem to get this one to actually hash.
Here are some screenshots:
http://imgur.com/a/mhiooThe top two are with a first power source, and then I swapped the PSU to one that was successfully powering one of my other S1s with no problem... but this one still didn't work.
Basically, it never shows any appreciable hashing... and the power load keeps fluctuating as shown.
I can't seem to figure it out, so any help is much appreciated!
- Sam