Hello everyone!
Could some help a man around abit? I got a S3(+) and im using the stock settings and also try with Oc little bit and nothing seem to work around.. My psu unit's are Dell12v 700w each.. So I connected 3 cap's on to the connection's to smoother the voltage out also thicker wires. But one of the S3 show's weird numbers on one of the fan's. Fan1 normal rpm but the fan2 is from 4200rpm to 6000rpm sometimes.. The temp mostly never go up more then around 40...isch
I try with flash new firmware and nothing seem to work.. I also disconnected the fan to see if there was some wrong with the fan but the S3 show's anyway high rpm :O wtf...