Anyone using the USB adapters? cgminer can not find the miner...so I hot plug and nothing but errors
I have verified with Grapeape I have the dip switches and cables correct. I compiled cgminer-4.7.1 using --enable-blockerupter
I am using latest wheezy on a rasp pi and just tried it using a powered hub with same result.
We have 6 Prismas in our facility all running using the USB adapters, no problems.
5 are plugged into a powered hub then into a laptop.
1 is plugged directly into an RPi.
This part may or may not be an actual thing:
For me, when I plugged them in via USB, it seemed the board that I was plugging the controller cable into required all the pins to be down. After that it didn't matter the config of the other pins, as long as they were all unique configs. Otherwise it would spit out TONS of errors.