How ou how should the voltage be written in new firmware field - chinese cant put an example to ease things.
so is it 0.63 or .63 or 0.63v perhaps .63v or even 0.63V .. .63V Please tell.
So ive got s3:s , I think i found it from s4 manual 0630 ? Doesnt seem to affect anyhow - is this field a Bitmain joke?
Hi, only with the option "Advanced Setting" in your miner status, you can adjust the voltage and frequency. Go to the Miner Configuration tab and in the Advanced Settings tab you will find the chip operating frequency and voltage set as default 225M and 0725-which means 0.725volts. You can select the voltage value from the pull-down menu, however you should modify the chip operating voltage by yourself as per the testing results. And the voltage and frequency should match in a proper way, otherwise, the miner will probably run in a abnormal status.