Post
Topic
Board Mining support
Re: Antminer U3 w/cgminer & Windows 7 64-bit. Some help given but some needed too.
by
BTC-TMXSTAR
on 18/11/2014, 13:56:18 UTC
Ok so after spending some time on the phone with someone in support from bitmain.   It is at the very least hashing.  I wouldn't say correctly, but hashing.   (Corrected as I typed it....)  Now it is Zombie again....

So has anyone actually gotten theirs to work at the right speed?

Also is anyone using a Raspberry Pi to do this as I want to move it to a Raspberry Pi which makes more sense power wise?


Steps used in getting the U3 to somewhat work:

1.  Installed Zadig WinUSB Driver Version 6.1.7600.16385    [WinUSB (v6.1.7600.16385)]
2.  Downloaded CgMiner Directly from Bitmain Support Site   "https://www.bitmaintech.com/support.htm?pid=007201404130633105772QFG6R2u0635"
3.  Ran THAT CGMINER with this command line:   cgminer.exe --bmsc-options 115200:10 -o nl2.stratum.io:3333 -u magicstix.mainpc -p x --bmsc-freq 0982     (This is where I wonder if the Voltage Arg is required or not?)


After this is would run for a bit then CGMiner would report libusb errors or -9 and also eventually zombie out.

Any help here?

where did you buy the Antminer U3?

Sorry for my Bad English
Thanks advance
and
God Bless!!!!!