antMiner_S320141126.bin don't surpport adjust voltage. Hash board's power maybe cut off when you over clock.
antMiner_S320141126.bin doesn't support anything at all - it is broken.
Read all the reports about it.
Remove it from your download site - then release a properly tested firmware that works!Now miner hardware modified, I want know your hash board's num. Can you help me? Thanks.
The numbers on the hash board are:
1. S3_CtrlBoard_AR9331_V1.1 ......below this is a number in small print which is:35622
2. One major part (ThinkPHY2 v2.0) smells like it had been cooking. It has a bar code number: 2059A0C7B253
EDIT: The control board looks like it's easy to replace. As this is still under 90 days, just send me another board and i can do the replacement.
EDIT 2: also note that the UPS tracking # for this order was: 1ZR78990D957451087. It was delivered to me on: Tuesday, 09/16/2014 at 10:42 A.M.
So, as it died on Dec 13th, due to the faulty Bitmain firmware, I still had a few days left on the warranty.