My Sp 20 is disconnecting/ stopping mining for no reason. I have 1300PSU platinum going and it keeps knocking itself offline. The fan is still running so the only way I can tell is when I log into it, which I can't do at that point. I log into my stats page on eligius and I can see I am zero hashing. If I reboot PSU then it comes back on. Seems to be happening between every 4 and 24 hours. Is anyone else having this issue?
I have reset to factory and now trying to run. we will see how this goes.
Exactly what I was having for a few times today. Is it running hot? I moved it to somewhere cold, and it hasn't crashed yet. *touches wood*
In garage. 30 degrees in there. Its not hot to the touch at all. psu wires not hot. I just reset to factory. maybe this will do it. time will tell.
What is the temperature shown in the Asic stat page? i had it in somewhere around 27*C, and it crashed afterwards. It's at somewhere 5*C now, still going with the stats in my last post above.
here's what I have. Why are some in yellow?
The max temps are 125*C for each of them. Once it hits 120*C I think they start to throttle themselves. According to what I've read, try keeping them at < 115*C for them to run more stably. I'm suspecting that the high temps in there might've caused the controller board to freeze somehow.
Max spec temps are 125C, max 'mining' temps are 120C, anything below that it considers there's more headroom and will try to push up clocks + voltages within the voltage and power ranges set.
Temperatures in ST gear look hotter than the competition due to the location of the temp sensor, but max temps are all in the same ballpark (100-130C).